Served from
Wise Glass, Haltom City
Our showroom is in Haltom City.
5004 Stanley Keller Rd, Haltom City, TX 76117(682) 688-8815HoursMon–Fri 8 am–5 pmSat–Sun closed
Wise Glass installs frameless shower doors and glass enclosures in Fort Worth, TX. Fort Worth is served from Wise Glass, Haltom City. One in-house team handles your project from first measurement to final install. No subcontractors, no handoffs outside our company. Send photos and rough dimensions for a quote within 24 hours. Larger or more complex projects get an in-person measurement.
Send the Fort Worth address, current shower photos and the changes you have planned. Include any steam equipment information or mirror work, and identify the contractor if the room is being renovated. We can discuss the glass layout against that information, then establish the selections and finished measurements needed for a clear, reviewable order.
Having trouble with the form? Open the secure form in a new tab or call (682) 688-8815.

A frameless door is cut to your opening and hung on hinges and clamps sized for the weight of the glass, with no metal frame and no bottom track. Houses that have stood for decades, like many in Fairmount and Arlington Heights, often have walls that are slightly out of plumb, and frameless panels are cut to the opening as it really is.
Our Fort Worth frameless shower guide walks through layouts, glass, hardware, hard water and what has to be finished before the final measurement.
A glass enclosure in Fort Worth can be as simple as one fixed panel beside a walk-in entry or as involved as a door, return panel and transom around a steam shower. Inline layouts run straight across the opening. Corner and neo-angle layouts add angles. Every enclosure is custom priced. The layout matters most: each angle and miter adds fabrication cost.
For steam showers, Wise Glass provides the steam-rated glass enclosure only. The steam generator and controls are not part of our work. Get the steam equipment installer lined up before the tile goes in, so the glass drawing can show the door, any transom and the seals that the room design calls for.
Quotes are held for 30 days, and revised quotes get the same 24-hour turnaround. That leaves room to settle the layout with your contractor before anything is ordered for the Fort Worth job.
Fort Worth is served from Wise Glass, Haltom City. Before the final measurement, every surface the glass touches (tile, curb, walls and floor) must be complete: tile set, grouted, caulked and fully cured, with waterproofing done. Your custom glass is typically installed within 7 to 10 days after the final measurement.
If steam is part of the renovation, raise it at the beginning. The enclosure needs to work with the room and selected equipment, so it is more than a change to the height of an ordinary shower door. Bring the equipment information and the proposed ceiling and wall details into the discussion.
Ask the project professionals to identify their respective responsibilities, including access for future servicing. The glass scope should be explicit about the proposed doorway and fixed panels. Follow the chosen system's requirements and review the full plan before approving fabrication. This prevents a late enclosure decision from being asked to solve construction questions that belong elsewhere.
The vanity mirror changes what you see across the room, including the shower itself. Compare its size and position with the light fixtures and the vanity rather than deciding on width alone. A single piece and separate mirrors can produce different proportions and different places for lighting.
Check the reflection at normal use heights and mention seated use if needed. For a custom quote, list the approximate size and location of each mirror, along with unfinished wall or backsplash details. Have the final boundaries confirmed before ordering. Keep the selected edge and mounting approach with the dimensions so the proposal describes the complete mirror work.
A Fort Worth shower glass job is usually one of two things: a new frameless door on a shower that is already tiled, or glass for a bathroom that is being remodeled. Fort Worth's official residential permitting page distinguishes cosmetic work from other building changes and specifically addresses plumbing work involving shower pans, so a full remodel can carry steps that a door swap does not. Tell us which kind of job yours is, photograph the finished opening, and name the contractor if one is involved. The glass proposal covers the panels, fittings and installation in the accepted scope. Fort Worth spans Tarrant, Denton, Johnson, Parker and Wise counties and is about 5 miles in a straight line from our Haltom City showroom.
Served from
Our showroom is in Haltom City.
5004 Stanley Keller Rd, Haltom City, TX 76117(682) 688-8815HoursMon–Fri 8 am–5 pmSat–Sun closed
Explore steam enclosures, mirrors and railings alongside your shower plans.
Browse the full glass gallery ↗Our showroom is in Haltom City. You'll find it at 5004 Stanley Keller Rd, just northeast of downtown Fort Worth. We are open Monday to Friday, 8 am to 5 pm.
The city's residential guidance distinguishes different kinds of work, including cosmetic changes and plumbing involving shower pans. The requirements depend on the actual scope at the property. Ask the city or the professional coordinating the job about that scope. A glass quote is a separate description of the enclosure work and does not determine permit status.
Every enclosure is custom priced. The layout matters most: each angle and miter adds fabrication cost. Glass thickness, glass type and hardware finish also affect the price. Send photos and rough dimensions for a quote within 24 hours. Larger or more complex projects get an in-person measurement.
Your custom glass is typically installed within 7 to 10 days after the final measurement. Wait 24 hours before the first shower so the silicone can cure, and do not touch the silicone seals while they cure.
Tell us about the room, the glass you have in mind and when the surrounding work will be ready.